 |
 |
 |
|
|
|
[Sponsors] | ||||
September 25, 2016, 01:42
|
Static temperature and Total temperature
|
#1 |
|
New Member
Jong-Yoon
Join Date: Apr 2016
Posts: 1
Rep Power: 0  |
Now, I am trying to simulate boiling flow in a microchannel with the evaporation and condensation model(Lee model). I have made UDFs for the model and simulated it. I have found that the static temperature is even higher than total temperature. I know the relation between the static temperature and total temperature based on Mach number. In the equation, is the total temperature always higher than the static temperature? What is the reason of this results?
And also, I have another question. the macro "C_T(c,t)" indicates a total temperature. Is there a macro for the static temperature? Please help me... Last edited by Jong-Yoon; September 29, 2016 at 14:02. |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| same static and total temperature problem | preetam69 | FLUENT | 1 | August 15, 2013 17:17 |
| Tf is averaged by static or total temperature ?? | NPU_conanxie | Main CFD Forum | 0 | April 6, 2011 21:30 |
| Bulk temperature Tf is obtained from total or static temperature? | NPU_conanxie | FLUENT | 0 | March 30, 2011 05:56 |
| Total temperature and static temperature | rogbrito | CFX | 1 | June 21, 2009 18:37 |
| The static temperature is higher than total temp | devy | FLUENT | 0 | March 27, 2003 20:16 |
Linear Mode
