|
[Sponsors] |
April 12, 2017, 04:42 |
fluent buoyancy flow
|
#1 |
New Member
zhouyu
Join Date: Nov 2016
Posts: 3
Rep Power: 9 |
hello
I'm trying to simulate turbulent mixed convection in a enclosure. the buoyancy force due to temperature is considered. the boussinesq approximation was used. the turbulent model was rng ke. the enhanced wall treatment was applied. I had tried two ways to get a better solution: 1. first, set the gravitational acceleration as a small value(0.098), and solve the case with first-order. then change the gravitational acceleration to 9.8. finally, solve the case with higher-order scheme. 2. first, solve the velocity field without temperature, and after it convergence, solving the energy equation with the momentum equations together. but it was hardly to get the convergence solution. can anyone give me some advises? thanks very much! |
|
February 11, 2018, 17:46 |
|
#2 | |
Senior Member
Yuehan
Join Date: Nov 2012
Posts: 142
Rep Power: 13 |
I am having the same problem. I tried both the ways you mentioned but I still cannot obtain converged solution. Did you eventually solve the problem?
Quote:
|
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 06:40 |
Fluent v15 multiphase flow b.c. failure Non-channel flow | mickjazz | Fluent Multiphase | 1 | September 22, 2014 06:41 |
The fluent stopped and errors with "Emergency: received SIGHUP signal" | yuyuxuan | FLUENT | 0 | December 3, 2013 22:56 |
Supersonic flow over an airfoil. FLUENT Lift don't match up with Shock Expansion Tech | enriccasas | FLUENT | 1 | August 21, 2013 06:43 |
Different flow patterns in CFX and Fluent | avi@lpsc | CFX | 6 | April 17, 2012 01:22 |