|
[Sponsors] |
2Phase flow simulation in Porous Media Ansys Fluent |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 22, 2017, 04:46 |
2Phase flow simulation in Porous Media Ansys Fluent
|
#1 |
New Member
Yaqub Yaqub
Join Date: Mar 2017
Location: Aberdeen
Posts: 3
Rep Power: 9 |
Hello All,
I want to simulate a water phase displacing oil in a porous media containing oil and water. 1. for an oil and water flow in a porous in porous media, which model is best in fluent; Multiphase mixture model or species transport? 2.* for the porous media simulation, if I want to set the porous media to have fluids originally inside before pumping from the inlet; say maybe 20% water and 80% oil before pumping water, how do I set the original fluid saturations in the porous media? I tried using patch after initializing but wondering if it's correct. 3. how can the flow be coupled with heat transfer for the inlet fluid and porous media to have different set temperature values. Please, I anticipate your gracious contributions and suggestions. Thanks in anticipation. Regards, Sent from my LG-D851 using CFD Online Forum mobile app |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 07:40 |
Porous media setup issues in Fluent | Bernard Van | FLUENT | 29 | January 26, 2017 05:09 |
porous media in Ansys fluent | Suresh Msk | FLUENT | 0 | November 17, 2014 09:09 |
Modelling flow thru wet porous media in fluent???? | Abhya | FLUENT | 0 | September 2, 2012 03:59 |
Simulation of Porous Media Flow | Sharad Dugad | FLUENT | 0 | December 24, 2001 02:57 |