CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

coil tank

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 14, 2017, 09:40
Post coil tank
  #1
New Member
 
saba
Join Date: Sep 2017
Posts: 5
Rep Power: 8
yassoub is on a distinguished road
hi every body
please I have reearch about the natural convection heat transfer from helically coiled tubes under constant wall heat flux density, with vertical axis in water was carried out. The effect of helix diameter and helix pitch on the local and average Nusselt number have assessed. A complex influence of the two
parameters on Nusselt number must be found. The heat transfer device was immersed in a cylindrical enclosure with vertical axis. The proximity of the wall enclosure must be found to influence the buoyancy induced flow
profile and as a consequence, Nusselt number value.
d of pipe =0.02m
D of coil=0.16 m
Pitch=0.05 m
Diameter of tank =0.6 m
No. of turn=9.5
coil inside tank
My question how Can I solve the model
because I solved it in Fluent , CFX, and comsol but I didnt have any result
I need to advice me
what should I do
Thanks
yassoub is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help! High pressure Gas discharge from tank to tank through a pipe superarthur86 FLUENT 2 June 16, 2017 10:22
Tank refuelling simulation Bisht STAR-CCM+ 4 July 30, 2015 11:02
error messages about blockmeshing and solving cramsdead OpenFOAM Pre-Processing 2 November 11, 2014 10:53
Mixture and Decay of a tracer in a Water Tank Jeffrey1992 CFX 2 July 27, 2012 13:31
Blow Tank Simulation ... Need Help! treyevans CFX 1 February 20, 2010 00:42


All times are GMT -4. The time now is 00:04.