|
[Sponsors] |
January 10, 2018, 08:43 |
UDF for Non-uniform gas holdup at inlet
|
#1 |
New Member
Masroor
Join Date: Nov 2015
Posts: 10
Rep Power: 10 |
Hello experts,
I want to write a UDF to set the non-uniform has holdup at inlet of a 3-D cylindrical column. For that I need to use the looping function so that a non-dimensional radial distance (in main equation) can be calculated. I referred an example of DEFINE_PROFILE macro that is about the parabolic velocity, but it is for a 2-D geometry whose inlet is basically an edge. Since I am using a 3-D geometry and here inlet is a face. I need opinion and directions of experts. Thanking you in advance and looking forward to receive a positive and quick response. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dsmcFoam setup | hherbol | OpenFOAM Pre-Processing | 1 | November 19, 2021 01:52 |
rhoSimpleFoam error | johny0688 | OpenFOAM Pre-Processing | 4 | June 1, 2021 12:23 |
Disappearing mass when using udf inlet profile | divergence | Fluent UDF and Scheme Programming | 5 | January 2, 2021 14:56 |
mixed inflow/outflow downstream boundary condition question | peob | OpenFOAM Running, Solving & CFD | 3 | February 3, 2017 10:54 |
Need help with boundary conditions: open to atmosphere | Wolle | OpenFOAM | 2 | April 11, 2011 07:32 |