|
[Sponsors] |
Size of particle will influence the Ansys to track it when using dpm injection? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 16, 2018, 09:41 |
Size of particle will influence the Ansys to track it when using dpm injection?
|
#1 |
New Member
Thum Guan Wei
Join Date: Mar 2018
Posts: 10
Rep Power: 8 |
Hello all, I have a curious, normally the size of particle will influence the Ansys to track it when using dpm injection?
For example, 100μm is more difficult than 2μm when ansys want to track it. This is because when i do the simulation with 2μm always show higher number incomplete particles compare to 100μm. But the thesis i refer is mention that 100μm will have higher incomplete particles. The particle i used is CaC03 and i set it as inert particle. By using group injection and i injet it from inlet and flow with water liquid(both water liquid and CaC03 also flow in 1.5m/s). Appreciate to those read and reply me. Result.png |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Particle Track Disturbed (Injection) | mfo_28 | FLUENT | 9 | October 29, 2017 14:22 |
FLUENT DPM unsteady particle time step VS injection time step | wv1216 | FLUENT | 0 | May 19, 2016 11:47 |
Particle size distribution DPM | barzin | FLUENT | 8 | January 25, 2016 05:15 |
Check particle impaction with User Fortran | Julian K. | CFX | 3 | January 12, 2012 09:46 |
multicomponent particle injection in DPM | Ning | FLUENT | 0 | December 23, 2008 08:23 |