|
[Sponsors] |
June 27, 2022, 15:40 |
porous media direction vector
|
#1 |
New Member
Join Date: Jun 2022
Posts: 27
Rep Power: 3 |
Hi All,
I am trying to simulate cross-sectional ultrafiltration. I have a wall with finite thickness to represent the membrane. When I tried to make it a porous zone, I am not sure how I should set my direction vector using a conical coordinate system. Can anyone explain how it works exactly? Thank you. |
|
June 27, 2022, 16:30 |
|
#2 |
New Member
Join Date: Jun 2022
Posts: 27
Rep Power: 3 |
I am not sure if this is 100% correct.
If my inlet fluid flow direction is in the z-direction (rotation axis). The cone angle is 0 since it is a cylinder. The cone axis vector should be (0,0,1); the point on the cone Axis can be (0,0,0). Let me know if there is any mistake in my thought, thank you! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Porous Media in Star-CCM+ | bcowling | STAR-CCM+ | 7 | June 24, 2020 12:01 |
Direction vector in spherical porous zone | wxn | FLUENT | 0 | June 28, 2017 09:58 |
fluent 2D axisymmetric with swirl simulation with porous media | user0314 | FLUENT | 1 | June 11, 2015 02:57 |
Porous media boundary conditions | aggie | FLUENT | 3 | June 17, 2012 09:51 |
Porous media Definition in FLUENT | Rashmi | FLUENT | 0 | May 13, 2006 00:55 |