CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

flow with free surface, dynamic mesh, vof, 6dof

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 23, 2018, 13:37
Default flow with free surface, dynamic mesh, vof, 6dof
  #1
New Member
 
Kevin Sandoval
Join Date: Nov 2018
Posts: 6
Rep Power: 6
ksansandoval is on a distinguished road
Dear, I have to do a 2d simulation, flowing around a ship, to analyze how it behaves with a certain slip, analyzing the balance it experiences, I have seen that the VOF model is used to separate the two phases involved and the Dynamic meshing with 6dof properties, also conjugating two meshes, utlilizing the "overset" between these two meshes, the bottom and the mesh that moves in a passive way with respect to the floating cuepo, I have had difficulty making this meshing, someone could Tell me how to do the meshing with the overset between these two meshes, would it be better to write an UDF for the movement of my mesh? Some recommendations that can give me to face the problem, I will be attentive to your comments and thank you very much! flow with free surface, dynamic mesh, vof, 6dof
ksansandoval is offline   Reply With Quote

Reply

Tags
dynamic mesh, free surface, overset mesh, vof

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan OpenFOAM Meshing & Mesh Conversion 3 October 22, 2015 12:05
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
[snappyHexMesh] Layers:problem with curvature giulio.topazio OpenFOAM Meshing & Mesh Conversion 10 August 22, 2012 10:03
[snappyHexMesh] Layers don't fully surround surface EVBUCF OpenFOAM Meshing & Mesh Conversion 14 August 20, 2012 05:31
UDF Defining VOF Free Surface at Outlet Alex Fluent UDF and Scheme Programming 13 August 8, 2012 17:50


All times are GMT -4. The time now is 20:47.