Problem in placed particle in bed in DPM approach

Amir4040 · February 27, 2019, 09:52

hi dears.

i have a spouted bed with about 100 mm of static head that particle put in that.

that is my problem to how can put the particle inside the bed ?

is there anyway rather than injection for define particle ?

because i dont have any kind of inject particle in fact and the particle there are inside of bed before .

thanks all.

akucuk · March 1, 2019, 03:08

you can write an injection file to define particles at certain coordinates if im not mistaken. i suggest you to search for more info about injection files in this forum.

Amir4040 · March 1, 2019, 13:09

thanks a lot for your help . but still i can't

February 27, 2019, 09:52	Problem in placed particle in bed in DPM approach	#1
Amir4040 New Member amir Join Date: Dec 2018 Posts: 2 Rep Power: 0	hi dears. i have a spouted bed with about 100 mm of static head that particle put in that. that is my problem to how can put the particle inside the bed ? is there anyway rather than injection for define particle ? because i dont have any kind of inject particle in fact and the particle there are inside of bed before . thanks all.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fixed Bed Gasifier, Species Transport Problem	therandomestname	FLUENT	12	January 4, 2019 07:08
problem during export of particle tracking data (good decription of the problem)	archetype	CFX	0	August 1, 2017 11:23
DPM Particle Tracking Study	ralph243	Fluent Multiphase	1	September 8, 2016 11:48
Wrong initial particle velocity in my air-blast-atomizer problem...?	gaghane	FLUENT	0	December 4, 2014 06:57
DPM UDF particle position using the macro P_POS(p)[i]	dm2747	FLUENT	0	April 17, 2009 01:29

March 1, 2019, 03:08		#2
akucuk New Member Aykut Kucuk Join Date: Nov 2018 Posts: 4 Rep Power: 7	you can write an injection file to define particles at certain coordinates if im not mistaken. i suggest you to search for more info about injection files in this forum.

March 1, 2019, 13:09		#3
Amir4040 New Member amir Join Date: Dec 2018 Posts: 2 Rep Power: 0	thanks a lot for your help . but still i can't