CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

volume fraction in multiphase problem in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   July 25, 2019, 03:34
Default volume fraction in multiphase problem in fluent
New Member
Join Date: Jun 2019
Posts: 8
Rep Power: 6
farshads83 is on a distinguished road
hi everyone, i have problem in simulating 2phase flow. the first phase is water and the second phase is nano particle(graphene oxide).the concentration of sulution is 500ppm(part per melion). the problem is that how can calculate volume fraction for secondary phase in inlet bc? can anyone give the formula of converting ppm to volume fraction?

concentration of sulution(nano fluid)=500ppm
volume of sulution=5 liter
volume fraction of secondary phase(nano particle)=?
farshads83 is offline   Reply With Quote


multiphase flow, ppm, volume fraction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
multiphase flow ,mass and volume fraction imbalance sope111 CFX 16 September 3, 2018 00:10
Why opening boundary for multiphase simulation must set Volume Fraction of each phase TerryNiu CFX 2 March 13, 2018 06:49
Zero Volume Fraction in Free Surface Problem marega CFX 1 September 10, 2009 06:31
interDyMFoam - change in volume fraction gopala OpenFOAM Running, Solving & CFD 0 April 27, 2009 10:46
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 21:14

All times are GMT -4. The time now is 13:47.