CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Using Expression for Adaptive Mesh Refining

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 6, 2019, 07:43
Default Using Expression for Adaptive Mesh Refining
  #1
New Member
 
Rajeev Kumar Singh
Join Date: Mar 2009
Location: Ranchi, Jharkhand, India
Posts: 2
Rep Power: 0
vinitraj3 is on a distinguished road
Hi everyone,

Reference Ansys 2019 R2.

Ansys 2019 has a new feature where we can use expressions directly. I am simulating movement of a droplet through air using VOF model. In order to capture the interface nicely I want to create finer mesh near the interface. In the Adapt/Create Register Fluent has a new feature where we can use expressions as Refinement or Coarsening criteria.

I want to refine all the cells which are having volume fraction be secondary phase between 0.9 and 1 and coarsen all the phases that are lying outside this region. I have written the commands as shown in attachment. However Fluent doesn't not evaluate. Can anyone help what is wrong in my expression.

Figure attached
Attached Images
File Type: png Figure1.png (15.5 KB, 27 views)
vinitraj3 is offline   Reply With Quote

Reply

Tags
ansys 2019 r2, expression, vof, volume fraction

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outlet boundary condition in interFoam Andrea_85 OpenFOAM Running, Solving & CFD 51 July 20, 2017 14:31
[snappyHexMesh] No layers in a small gap bobburnquist OpenFOAM Meshing & Mesh Conversion 6 August 26, 2015 10:38
[ANSYS Meshing] guidance about refining hex mesh? hamidciv ANSYS Meshing & Geometry 15 July 27, 2015 03:28
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry pizzaspinate OpenFOAM Meshing & Mesh Conversion 1 February 25, 2015 08:05
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10


All times are GMT -4. The time now is 10:17.