CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Imposing pressure drops manually?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 6, 2019, 01:36
Default Imposing pressure drops manually?
  #1
New Member
 
Join Date: Jan 2016
Posts: 7
Rep Power: 10
thewitcher745 is on a distinguished road
Hi, my problem is 2D, steady-state simulation of a turbulent-regime hydraulic system including filters, and I have the pressure drop value that the filters exert on my system. I want to manually insert these pressure drops into Fluent at certain lengths along the pipe without fully modeling the details of the filter's inner mechanisms. My system is otherwise fully stable and easily solved.

Thank you in advance.
thewitcher745 is offline   Reply With Quote

Reply

Tags
fluent, hydraulics, minor losses, pressure drop

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure fields in FOAM, p field, total pressure, etc. Tobi OpenFOAM Post-Processing 9 March 25, 2022 01:33
Adjuting oulet pressure till inlet pressure reaches a certain value in timestep pvpnrao OpenFOAM Running, Solving & CFD 2 September 11, 2018 10:14
outlet pressure Boundary settings -velocity streamline under ambient temp.conditions Vishnu_bharathi CFX 12 November 21, 2017 06:56
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Wall roughness effects on pressure drops Vangol CFX 1 July 12, 2013 06:41


All times are GMT -4. The time now is 01:25.