Vaporization and condensation ansys fluent

marat~ · November 25, 2019, 04:43

Hello friends.

There was a problem. Can't make the vaporization in the tube. That is, the tube operates, the temperature of 3000K. The tube enters the water is 0.1 m/s, and the output pair is not PRESENT, even a little bit. If faced with such a problem, I will be happy for help.

Link to the entire project.
https://yadi.sk/d/t4Rvby-R6bwIfg

marat~ · November 25, 2019, 04:46

Hello friends.

There was a problem. Can't make evaporation in the tube. The temperature of 3000K acts on the tube. Water enters the tube at 0.1 m/s, and there is no output pair, even a little. If you encounter such a problem, I will be glad for help.

Link to the project
https://yadi.sk/d/t4Rvby-R6bwIfg[/QUOTE]

MKuhn · November 26, 2019, 10:15

Really 3000 K? What is the material of your tube?
Due to the high temperature difference between the liquid water and 3000 K it will be very complicated to setup the vaporization correctly.

November 25, 2019, 04:43	Vaporization and condensation ansys fluent	#1
marat~ New Member Marat Join Date: Nov 2019 Posts: 4 Rep Power: 6	Hello friends. There was a problem. Can't make the vaporization in the tube. That is, the tube operates, the temperature of 3000K. The tube enters the water is 0.1 m/s, and the output pair is not PRESENT, even a little bit. If faced with such a problem, I will be happy for help. Link to the entire project. https://yadi.sk/d/t4Rvby-R6bwIfg Last edited by marat~; November 25, 2019 at 04:46. Reason: Badly written question

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
evaporation rate in wall film vaporization model	tmy	CONVERGE	2	November 13, 2018 10:52
condensation	kz21	Fluent Multiphase	3	February 23, 2018 04:56
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 06:27
vaporization and condensation problems??	symanth	FLUENT	2	February 15, 2006 20:09

November 25, 2019, 04:46		#2
marat~ New Member Marat Join Date: Nov 2019 Posts: 4 Rep Power: 6	Hello friends. There was a problem. Can't make evaporation in the tube. The temperature of 3000K acts on the tube. Water enters the tube at 0.1 m/s, and there is no output pair, even a little. If you encounter such a problem, I will be glad for help. Link to the project https://yadi.sk/d/t4Rvby-R6bwIfg[/QUOTE]

November 26, 2019, 10:15		#3
MKuhn Senior Member Moritz Kuhn Join Date: Apr 2010 Location: Germany, Dresden Posts: 207 Rep Power: 17	Really 3000 K? What is the material of your tube? Due to the high temperature difference between the liquid water and 3000 K it will be very complicated to setup the vaporization correctly.