 |
 |
 |
|
|
|
[Sponsors] | ||||
May 4, 2020, 02:09
|
setup problem
|
#1 |
|
New Member
aaryan aarya
Join Date: May 2020
Posts: 3
Rep Power: 6  |
After clicking on setup in the setup window nothing appear. It says Cleanup script file is C:\Users\Acer\cleanup-fluent-DESKTOP-6UCPJVO-9936.bat
> and nothing happens. This is new to me, while opening my previously saved file setup, it works fine but for new project, I create geometry and mesh and for setup window this happens |
|
|
|
|
|
May 5, 2020, 08:58
|
Setup
|
#2 |
|
Senior Member
|
If the tick mark on Mesh is not green, do not open Fluent since the mesh is not ready. If it is green, then close setup and open again. If it is not green, just right click on Mesh and select Update or Refresh. This is new in newer versions.
__________________
Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority. |
|
|
|
|
|
|
May 6, 2020, 07:25
|
|
#3 |
|
New Member
aaryan aarya
Join Date: May 2020
Posts: 3
Rep Power: 6 |
Thanks a lot, after refreshing it works.
|
|
|
|
|
|
|
May 6, 2020, 10:21
|
Good
|
#4 |
|
Senior Member
|
That's good that it works after Refresh.
__________________
Regards, Vinerm PM to be used if and only if you do not want something to be shared publicly. PM is considered to be of the least priority. |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| setup vof test problem | Fang Jin | FLUENT | 1 | June 14, 2005 08:27 |
| Dynamic Mesh setup problem | Jim | FLUENT | 1 | June 8, 2005 09:26 |
| Problem Setup: Bi-Axial Rotation Possible? | Harmeet | CFX | 6 | February 11, 2005 15:27 |
| CFD problem setup for flow through porous media | Paresh Jain | CFX | 5 | June 30, 2003 03:50 |
| CFD problem Setup for Packed Bed Column | Vijay | CFX | 0 | June 20, 2003 08:23 |
2Likes
Linear Mode
