 |
 |
 |
|
|
|
[Sponsors] | ||||
P1 radiation model convergence problem with DPM, BERL combustor |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 23, 2020, 06:34
|
P1 radiation model convergence problem with DPM, BERL combustor
|
#1 |
|
Member
Muhammad Ali Uzair
Join Date: Sep 2017
Posts: 44
Rep Power: 8  |
Hi,
I am simulating a BERL combustor using DPM with an oil injection, radiation models DO and P1. My simulations work perfectly with an oil injection, gas mass flow and DO radiation model. But P1 model doesn't work with the combination of DPM and gas flow. However, P1 works only with DPM (i.e. NO gas). Whenever i introduce gas, the simulations diverge. Can anyone please address this. |
|
|
|
|
|
| Tags |
| ansys fluent, convergence issue, do radiation model, dpm, p1 radiation |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Transition SST model - convergence problem with 2nd order discretization | xara | FLUENT | 4 | May 27, 2013 13:16 |
| Force can not converge | colopolo | CFX | 13 | October 4, 2011 22:03 |
| Heat Transfer convergence Problem mit a 1/6 compressor model | chili023 | CFX | 1 | January 15, 2011 06:41 |
| Convergence problem with thermal phase change model under low velocity conditions | pitisrisuk | CFX | 0 | July 21, 2009 11:21 |
| Radiation problem for car model | aero | FLUENT | 1 | February 3, 2007 23:30 |
Linear Mode
