Define Monitor as a temperature matrix across the surface.

anooj · November 19, 2020, 12:53

Hi
I am running fluent simulations for phase change process. I need to extract temperature as a matrix, each element of matrix corresponds to a temperature of a point on the surface. I found it very hard to define a separate monitor for each point and save it to file. I am using Fluent 18.

Thanks in advance.

MKuhn · November 20, 2020, 02:27

If you can update your fluent, do it. From 19 it is possible to store different monitors to a single file.

anooj · November 20, 2020, 03:31

Thanks for the reply, In fluent 18 I can store them in single file

It's not about storing then in a single file, I have to manually define a monitor for each point.

MKuhn · November 20, 2020, 03:40

If you know the coordinates, try to write a journal.

AlexanderZ · November 23, 2020, 01:12

from my point of view,
easiest way actually is define all points. you may define list of this points which contains coordinates. Once it is done, read this list using journal, to create points automatically.

Also, you may write data to file using UDF. In that case you will still need list of coordinates. UDF is more tricky

November 19, 2020, 12:53	Define Monitor as a temperature matrix across the surface.	#1
anooj New Member Anooj Join Date: Sep 2020 Posts: 3 Rep Power: 5	Hi I am running fluent simulations for phase change process. I need to extract temperature as a matrix, each element of matrix corresponds to a temperature of a point on the surface. I found it very hard to define a separate monitor for each point and save it to file. I am using Fluent 18. Thanks in advance.

November 23, 2020, 01:12		#5
AlexanderZ Senior Member Alexander Join Date: Apr 2013 Posts: 2,363 Rep Power: 34	from my point of view, easiest way actually is define all points. you may define list of this points which contains coordinates. Once it is done, read this list using journal, to create points automatically. Also, you may write data to file using UDF. In that case you will still need list of coordinates. UDF is more tricky __________________ best regards ****************************** press LIKE if this message was helpful

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Problems with coedge curves and surfaces	tommymoose	ANSYS Meshing & Geometry	6	December 1, 2020 11:12
problem in temperature and liquid fraction value in the udf	durg	FLUENT	0	October 23, 2018 01:52
Cluster ID's not contiguous in compute-nodes domain. ???	Shogan	FLUENT	1	May 28, 2014 15:03
Temperature growth from hot coil surface	L. Hamid	Main CFD Forum	0	December 17, 2013 06:38
Free surface boudary conditions with SOLA-VOF	Fan	Main CFD Forum	10	September 9, 2006 12:24

November 20, 2020, 02:27		#2
MKuhn Senior Member Moritz Kuhn Join Date: Apr 2010 Location: Germany, Dresden Posts: 207 Rep Power: 17	If you can update your fluent, do it. From 19 it is possible to store different monitors to a single file.

November 20, 2020, 03:31		#3
anooj New Member Anooj Join Date: Sep 2020 Posts: 3 Rep Power: 5	Thanks for the reply, In fluent 18 I can store them in single file It's not about storing then in a single file, I have to manually define a monitor for each point.

November 20, 2020, 03:40		#4
MKuhn Senior Member Moritz Kuhn Join Date: Apr 2010 Location: Germany, Dresden Posts: 207 Rep Power: 17	If you know the coordinates, try to write a journal.