How to set the number of digits in the fluent console.

ztdep · December 27, 2020, 07:21

Hello:
I want to know how to set the number of digits in the fluent console.
The defaults are only 6 digits in the output screen, the "xyz" residual and all the monitor value, and the report values.
I have used the double-precision fluent, but it still can't output more digits.
Could you please give me some suggestions?
Regards

cesaaargm · April 21, 2022, 06:05

Hi,

I am looking for the same and did not find it sofar neither in the Fluent User's Guide (2022) nor in the Fluent Console manual.

However, the monitoring points are written into the out file with the maximum precision and also I use a convergence criteria for my Tau_wall desired value, so this should not be a big problem.

Regards

Cesare

AlexanderZ · April 21, 2022, 22:32

graphics -> colormap -> precision

December 27, 2020, 07:21	How to set the number of digits in the fluent console.	#1
ztdep Senior Member p ding Join Date: Mar 2009 Posts: 427 Rep Power: 19	Hello: I want to know how to set the number of digits in the fluent console. The defaults are only 6 digits in the output screen, the "xyz" residual and all the monitor value, and the report values. I have used the double-precision fluent, but it still can't output more digits. Could you please give me some suggestions? Regards DrZoidberg likes this.

April 21, 2022, 06:05	I did not find it neither	#2
cesaaargm New Member Cesare Ghionoiu Martínez Join Date: Jan 2021 Location: Braunschweig Posts: 2 Rep Power: 0	Hi, I am looking for the same and did not find it sofar neither in the Fluent User's Guide (2022) nor in the Fluent Console manual. However, the monitoring points are written into the out file with the maximum precision and also I use a convergence criteria for my Tau_wall desired value, so this should not be a big problem. Regards Cesare

April 21, 2022, 22:32		#3
AlexanderZ Senior Member Alexander Join Date: Apr 2013 Posts: 2,363 Rep Power: 34	graphics -> colormap -> precision __________________ best regards ****************************** press LIKE if this message was helpful

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
SimpleFoam & Theater	jipai	OpenFOAM Running, Solving & CFD	3	June 18, 2019 10:11
does Hyperthreading affect the application of UDF?	SJSW	Fluent UDF and Scheme Programming	11	October 10, 2018 22:28
Ansys Licence Serve on Ubuntu 16.04 LTS	david.pasquale	ANSYS	2	January 20, 2017 11:52
The fluent stopped and errors with "Emergency: received SIGHUP signal"	yuyuxuan	FLUENT	0	December 3, 2013 22:56