Ansys Fluent CFD Solver display issues

Jowan · February 10, 2021, 07:19

Hi there

I'm new to Ansys and am having some trouble with the display for Ansys Fluent CFD Solver.

In the main Workbench window and when I open Geometry and Mesh these display normally (see below).
Workbench.jpg

However, when I open Setup, the window is really zoomed in which is making it hard to use (see below).
Setup window.jpg

Does anyone know how I can fix this?

Lorenzo Basili · February 12, 2021, 14:54

Try to reset the original layout. There should be an appropriate button "restore default layout".

Otherwise try: ctrl+zoom out

Jowan · February 12, 2021, 17:05

Hi Lorenzo. Can you provide more details of how I can do this?

Do you mean ctrl + /ctrl -?

February 10, 2021, 07:19	Ansys Fluent CFD Solver display issues	#1
Jowan New Member Jowan S Join Date: Feb 2021 Posts: 3 Rep Power: 5	Hi there I'm new to Ansys and am having some trouble with the display for Ansys Fluent CFD Solver. In the main Workbench window and when I open Geometry and Mesh these display normally (see below). Workbench.jpg However, when I open Setup, the window is really zoomed in which is making it hard to use (see below). Setup window.jpg Does anyone know how I can fix this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent and Python CFD code as coupled solver	lignorant	FLUENT	0	December 13, 2019 14:05
Fluent in Ansys Workbench : Change Working Directory	sral	FLUENT	4	March 29, 2019 10:29
concentric tube heat exchanger cfd analysis using ansys fluent	Rohith	FLUENT	0	April 9, 2018 09:25
2-way FSI in Ansys CFX 15	LucasGasparino	CFX	3	August 6, 2015 03:17
Cluster ID's not contiguous in compute-nodes domain. ???	Shogan	FLUENT	1	May 28, 2014 15:03

February 12, 2021, 14:54		#2
Lorenzo Basili New Member Lorenzo Basili Join Date: Feb 2021 Posts: 3 Rep Power: 5	Try to reset the original layout. There should be an appropriate button "restore default layout". Otherwise try: ctrl+zoom out

February 12, 2021, 17:05		#3
Jowan New Member Jowan S Join Date: Feb 2021 Posts: 3 Rep Power: 5	Hi Lorenzo. Can you provide more details of how I can do this? Do you mean ctrl + /ctrl -?