|
[Sponsors] |
Open Channel Flow - problems with boundaries conditions |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 7, 2021, 14:54 |
Open Channel Flow - problems with boundaries conditions
|
#1 |
New Member
Join Date: Dec 2021
Posts: 1
Rep Power: 0 |
Hello,
I'm running an open channel flow simulation in Ansys Fluent and my idea is to try different combinations of inlet and outlet boundaries conditions. However, when I try the combinations inlet: mass-flow-inlet --- outlet: outflow inlet: pressure-inlet --- outlet: outflow The program shows an error message at the second interaction: https://ibb.co/XjXjDKP (sorry, I couldn't upload the image here) Also, as you can see in the image (behind the error message), the flow's behavior is really weird I can't find what is happening... When I use other combinations, the simulation works just fine. The simulation is an open channel flow with water and the viscous model is the standard k-epsilon (I also tried k-omega) model. Thank You |
|
Tags |
ansys, boundaries condition, fluent, k-epsilon k-omega, open channel flow |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[foam-extend.org] Problems installing foam-extend-4.0 on openSUSE 42.2 and Ubuntu 16.04 | ordinary | OpenFOAM Installation | 19 | September 3, 2019 18:13 |
Open Channel Boundary Conditions Issues | Env | FLUENT | 8 | June 28, 2016 16:05 |
what is swap4foam ?? | AB08 | OpenFOAM | 28 | February 2, 2016 01:22 |
SparceImage v1.7.x Issue on MAC OS X | rcarmi | OpenFOAM Installation | 4 | August 14, 2014 06:42 |
Open Channel Boundary Conditions via journal | Matteo | FLUENT | 0 | January 21, 2008 11:05 |