CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

solidification/melting model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 16, 2022, 06:57
Default solidification/melting model
  #1
New Member
 
anonymous
Join Date: Dec 2018
Posts: 12
Rep Power: 6
cfd new is on a distinguished road
Hello all,
I am trying to model solidification of molten pool of material (on the floor) due to heat transfer to surrounding air and radiative heat transfer to surrounding surfaces.
I understood that in FLUENT, enthalpy-porosity formulation is used in the solidification model.
Now, my molten pool also has some heat source at the bottom, due to which solidification and melting process will continue till the steady state will reach.Also I have porosity variation data with temperature from experiment. Let us say, for temp less that T1, porosity is 0.5. Between T1 to T2, porosity linearly varies from 0 to 1 (T2>T1).

I want to know how can I give this condition in the FLUENT.

PS. Forgive me if I have any misunderstanding regarding solidification model, corrections are welcome.
cfd new is offline   Reply With Quote

Reply

Tags
fluent, mushy zone, solidification

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[IHFOAM] The IHFOAM Thread Phicau OpenFOAM Community Contributions 377 October 28, 2022 16:36
interFoam wave propagation and explosion of Courant number and residuals ChiaraViola OpenFOAM Running, Solving & CFD 1 June 26, 2019 06:36
NEW turbulence TRANSITIONAL model giammy92 OpenFOAM 3 June 30, 2016 10:47
manualInjection model in sprayFoam Mentalo OpenFOAM Running, Solving & CFD 1 April 2, 2014 10:29
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27


All times are GMT -4. The time now is 08:06.