|
[Sponsors] |
Convergence issue due to high rotational speed |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 3, 2022, 09:41 |
Convergence issue due to high rotational speed
|
#1 |
New Member
Shuttle
Join Date: Jul 2022
Posts: 5
Rep Power: 3 |
Hello,
I am currently simulating a gap between the rotor (rotating at 12000 RPM) and stator with eccentricity in Fluent, however, I am getting a reverse flow both at the inlet and outlet, at inlet some reverse flow is expected, but at the outlet not. I am trying to verify my model based on a research paper. Because of that, I am also having convergence issues with continuity. I found some solutions on the internet but they are somehow not working. I didn't try to extend my domain because of the dimensions given in the paper. Any suggestion would be nice, as I am stuck due to that in my work. MicrosoftTeams-image.png MicrosoftTeams-image (1).jpg |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[openSmoke] LaminarSMOKE compilation error | mdhfiz | OpenFOAM Community Contributions | 7 | October 4, 2022 13:57 |
interFoam Simulation speed and convergence graph | caganini | OpenFOAM Running, Solving & CFD | 0 | April 12, 2022 03:34 |
Air filter holder, questions about high turbulence viscosity and convergence | clmr90 | FLUENT | 0 | January 24, 2019 15:38 |
High speed compressible flow through pipe | Munni | Main CFD Forum | 6 | December 7, 2015 11:33 |
Convergence Speed | Maciej Matyka | Main CFD Forum | 1 | June 12, 2003 12:20 |