CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Trouble in two inlets and two outlets boundary definition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 9, 2023, 17:30
Default Trouble in two inlets and two outlets boundary definition
New Member
Matheo Alave
Join Date: Feb 2023
Posts: 1
Rep Power: 0
Starpred is on a distinguished road
Hi! I am new to the CFD and Ansys Fluent world and I've been learning from various manuals and videos to make my thesis. I've been trying to make a simulation of a VAWT in the middle of a highway to obtain the cp values and other important parameters of efficiency. The setup I've made is one turbine surrounded by a stationary space where there's an inlet in the lower left corner and other one of the upper right corner. There's also some outlets following the same logic, with no separation between them. (both inlets and outlets are independent). There is a phenomena that seem to create a void in the outlets and drag the current directly to them instead of going straight forward. Is there a way to avoid this issue or to modify the boundary conditions and obtain the correct simulation? Thanks in advance
Attached Images
File Type: jpg image_2023-02-09_182942060.jpg (76.8 KB, 3 views)
Starpred is offline   Reply With Quote


boundaries definition, fluent 14, vertical axis

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:49.