|
[Sponsors] |
Particles Evaporating while Advancing DPM Injection |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 3, 2023, 09:32 |
Particles Evaporating while Advancing DPM Injection
|
#1 |
New Member
Join Date: May 2021
Location: Australia
Posts: 11
Rep Power: 5 |
Carbon particles are evaporating and I don't know why.
Injected particles are 144 nm in diameter. Domain is 8 mm diameter 250 mm long. Approx. 85000 elements. Model includes stiff chemistry and therefore temperature is changing in the domain. Wall temperature set to 1700 K. Running steady state for volumetric phase and unsteady tracking for particles. I increased vaporization temperature to maximum but particles are still evaporating. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF in case with DPM modle | POSTHU | Fluent UDF and Scheme Programming | 0 | March 3, 2021 08:21 |
DPM Injection of particles | Jibin Boban | FLUENT | 0 | August 11, 2020 05:52 |
Problem with DPM simulation with particles injection and EXECUTE_AT_THE_END UDF. | Ari | Fluent UDF and Scheme Programming | 4 | May 31, 2016 09:51 |
Injection of specific number of particles in DPM | DH | FLUENT | 12 | March 16, 2016 22:04 |
injection problem | Mark New | FLUENT | 0 | August 4, 2013 02:30 |