|
[Sponsors] |
February 12, 2000, 08:38 |
Graphics setting
|
#1 |
Guest
Posts: n/a
|
Can anyone tell me how to change the graphic setting for the background to white on the velocity vector display. It make the vector arrows hard to see when printed out.
|
|
February 14, 2000, 09:00 |
Re: Graphics setting
|
#2 |
Guest
Posts: n/a
|
when you do hardcopy, there is an option which you can reverse the back/fore-ground colors to make the background white and save it in an image format you want...
|
|
February 23, 2000, 09:43 |
Re: Graphics setting
|
#3 |
Guest
Posts: n/a
|
What works best for hardcopy when Fluent is on a UNIX machine and you are accessing it via a PC? I have not had much luck yet. I don't have access to a postscript printer.
|
|
February 24, 2000, 10:26 |
Re: Graphics setting
|
#4 |
Guest
Posts: n/a
|
> What works best for hardcopy when Fluent is on a UNIX machine and you are accessing it via a PC?
Cindy, one option for running Fluent 5 on a UNIX machine when you are sitting in front of a windows PC is to use the remote execution ability of fluent to run the interface process locally on the PC and then use the File|Run... panel to start the solver on the UNIX box. The advantages are 1) you get the native Windows interface and integration (including printing support), 2) you don't need to run an X server on your PC (fewer processes and memory usage on the pc, less network load and better graphics performance), and 3) you offload some of the resource usage from the UNIX box, allowing it to just run the solver. Chris |
|
February 24, 2000, 15:04 |
Re: Graphics setting
|
#5 |
Guest
Posts: n/a
|
I used a rastered tiff image, the postscript from hardcopy can't be import to office softwares for print/viewing, though PS has better quality...
|
|
February 25, 2000, 11:52 |
Re: Graphics setting
|
#6 |
Guest
Posts: n/a
|
I've tried a rastor tiff image also. Perhaps I don't have the size correct. All I get with that is an extremely small box with apparently nothing in it.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Setting up a new CFD lab | asitkm | Hardware | 1 | January 8, 2011 14:55 |
Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 21:58 |
Setting or Graphics problem? | Nikolaos | FLOW-3D | 3 | December 5, 2008 00:31 |
Ultra high temperature? | bk | Siemens | 2 | July 19, 2005 00:01 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 04:41 |