 |
 |
 |
|
|
|
[Sponsors] | ||||
November 6, 2000, 19:20
|
Tracking/Modifying Cell Zones
|
#1 |
|
Guest
Posts: n/a
|
I'm using Fluent 5.x (5.4) and I'd like to be able to acess/modify the fluid zone to which a particular cell belongs using a UDF. Does anybody know:
1. how to find out to which cell zone a particular cell belongs 2. how to change which cell zone a particular cell belongs to. Many thanks, Regards Greg Perkins |
|
|
||
|
November 7, 2000, 00:35
|
Re: Tracking/Modifying Cell Zones
|
#2 |
|
Guest
Posts: n/a
|
Hi Gregg, in pp 26, section 2.9.5 of the UDF users manual there is a nice example in which it is found if a cell is in a porous media.
Maybe that helps. |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Other] how to extract cell zones by cgnsToFoam | Ohbuchi | OpenFOAM Meshing & Mesh Conversion | 0 | July 22, 2010 05:19 |
| Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 22:58 |
| "Mobile" entities: cell zones, sources, etc... | r08n | OpenFOAM Programming & Development | 0 | March 26, 2010 13:23 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
| Warning 097- | AB | Siemens | 6 | November 15, 2004 05:41 |
Linear Mode
