|
[Sponsors] |
April 10, 2001, 12:30 |
mixing with stirrer
|
#1 |
Guest
Posts: n/a
|
I want to know how to use the multiple refernce frame (fluent 5) to model the flow around the stirrer. I used one circular section of grid around the stirrer, this region is solved in reference frame, while the outer region is solved in stationnary reference frame. but i' m not sure is good idea to do that, because the stirrer 's ends are too near the tank's wall.
Thanks for your help |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mixing plane model: too much backflow and does not converge | sbhi | FLUENT | 1 | December 4, 2014 00:31 |
Problem with Mixing plane | Mitpostdoc | FLUENT | 0 | July 26, 2011 14:31 |
Meshing a Mixing Plane using ICEM | Will Anderson | FLUENT | 0 | November 6, 2010 17:08 |
turbine efficiencies, conservation rules across mixing planes | Jonathan | FLUENT | 0 | October 4, 2010 09:04 |
Mixing plane geometry definition | Hbet | FLUENT | 0 | January 18, 2002 07:16 |