 |
 |
 |
|
|
|
[Sponsors] | ||||
October 21, 2001, 04:13
|
DO model for RADIATION
|
#1 |
|
Guest
Posts: n/a
|
Hallo,
I'm simulating car windows exposed to the rays of the sun. I know that the sun radiation is about 900[W/m2]. Using DO model for radiation, in the BC at wall I can set "External Radiation" giving temperature and emissivity. But using a "semi-trasparent" wall (for the glass) in the bottom of the BC panel, I have to set the direction of the sun rays and also the IRRADIATION!!!? So my question is : what's the difference between the values of "External Radiation" and "Irradiation"???? Thank you Davide |
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| question about turbulence model selection and sensitivity | karananand | Main CFD Forum | 1 | February 26, 2010 05:41 |
| Centrifugal Pump and Turbulence Model | Michiel | CFX | 12 | January 25, 2010 04:20 |
| Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 26, 2009 00:27 |
| Reynolds Stress model in CFX vs Fluent | Tim | CFX | 1 | October 7, 2009 07:19 |
| Grid resolution for full-scale and down scaled model | gravis | Main CFD Forum | 0 | October 2, 2009 11:27 |
Linear Mode
