|September 26, 2002, 05:30||
Unsteady Simulations of Phase Change
I am currently doing simulations of a 2D, rectangular enclosure containing wax( with melting point = 317K). My boundary conditions are that the vertical copper wall surfaces are at a isothermal temp. of 363K and the horizontal wall surfaces are adiabatic at 300K.
My model used in Fluent 6.0 is unsteady, segregated, and first order implicit.
As this is a conduction problem, the heated walls will conduct the heat into the wax, causing the wax to melt.I need to monitor the liquid fraction as it varies with time.
Is there anything else i have to include or have excluded?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Unsteady flow phase shift||fuat||FLUENT||0||October 31, 2008 04:20|
|water 2 phase, Change from hight to low temp||panuwat||FLUENT||0||June 19, 2006 08:50|
|Solid Phase change material||qiulan||CD-adapco||0||June 5, 2006 15:30|
|phase change||rookie||FLUENT||3||June 12, 2003 20:47|
|Phase change process||Sang-jin Lee||CD-adapco||5||December 5, 2001 06:17|