|
[Sponsors] |
November 7, 2003, 04:49 |
URGENT, UDF-multiphase!
|
#1 |
Guest
Posts: n/a
|
In my UDF for phase change using source terms, the primary and secondary threads are not recognising the actual primary and secondary threads defined in fluent... I mean, liquid (primary) and vapor regions (secondary) are patched in fluent and in UDF, 0 is assigned for primary phase and 1 for the secondary phase. now in the program, it has to check cell temperature of liquid(primary) for crossing saturation temperature and then only it has to execute evaporation function, but it is reading the vapor phase temp.s which are already more than sat temp and so the evap. func. is executed...which is wrong...either way it reading max temps..
i hope u understand my prob. thanks in advance prasanth |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF for coal combustion in multiphase flow | niisha24 | Fluent UDF and Scheme Programming | 13 | September 19, 2022 04:01 |
How to access only one phase in multiphase model by UDF | wersoe | Fluent UDF and Scheme Programming | 1 | January 4, 2017 07:11 |
udf for multiphase flow with real gas mixture | sugumaran | Fluent UDF and Scheme Programming | 2 | January 27, 2013 23:10 |
Urgent, Urgent, a UDF problem, PLEASE HELP!!! | Max | FLUENT | 1 | September 24, 2010 20:30 |
UDF for multiphase flow | ROOZBEH | FLUENT | 3 | April 7, 2004 17:54 |