 |
 |
 |
|
|
|
[Sponsors] | ||||
February 8, 2004, 07:38
|
open mesh files in gambit
|
#1 |
|
Guest
Posts: n/a
|
how can I open the mesh file which is available in Fluent CD in the gambit inorder to modify the geometry or the boundary conditions?
|
|
|
||
|
February 8, 2004, 08:00
|
Re: open mesh files in gambit
|
#2 |
|
Guest
Posts: n/a
|
Hi; You should in Gambit at first set the solver to Fluent, then go to the "file" menue and "import" your mesh file (not case file)from your working directory of Gambit.
Hope this help you! Roozbeh Mousavi |
|
|
|
||
|
February 11, 2004, 16:22
|
Re: open mesh files in gambit
|
#3 |
|
Guest
Posts: n/a
|
ERROR: The Fidap Neutral file header (record 1) is non-standard.
This is what I got when I tried to follow your procedure! |
|
|
|
||
|
February 20, 2004, 05:39
|
Re: open mesh files in gambit
|
#4 |
|
Guest
Posts: n/a
|
Simply answer: do not try to open mesh in gambit.
If you create gambit geometry it is stored like vectors. Mesh contains set of points. I tryed to export mesh and re-read mesh but it caused data loss... Use gambit files instead... |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| wmake compiling new solver | mksca | OpenFOAM Programming & Development | 14 | June 22, 2018 06:29 |
| How to open mesh file in Gambit /pls help | FRAJ | FLUENT | 14 | February 19, 2017 01:36 |
| Converting Starccm+ mesh | Ladnam | OpenFOAM | 0 | September 14, 2011 06:30 |
| fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
| Reading mesh files into Fluent from Gambit | Prabhu.B | FLUENT | 4 | July 16, 2002 19:03 |
Linear Mode
