|
[Sponsors] |
April 19, 2004, 13:59 |
Urgent Help needed on casting
|
#1 |
Guest
Posts: n/a
|
Dear Guys,
I am doing project on solidification of casting.i modeled component with gating arrangements. i applied boundary conditions are 1. velocity inlet at the entry of gate with a velocity of about 2m/s and tem 1800K 2. velocity of about 0.1 at the outlet with temp 1000K 3. then wall conditions of about 300 ambient temp the materials with melting heat, liquidus, solidus temp. these are the bc had given and with unsteady molten metal flow, My problem is not converging and continuity equation reaches a infinite value.if any one find solution send me with a source code. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
urgent help needed (rhie-chow interpolation problem) | Ardalan | Main CFD Forum | 2 | March 18, 2011 15:22 |
help needed in Turbulent flow (URGENT) | mike | FLUENT | 7 | November 7, 2008 06:11 |
Urgent help needed with spray injection | nick | Siemens | 14 | June 29, 2008 18:48 |
Urgent Help Needed! | Ken Adams | FLUENT | 3 | September 25, 2007 23:50 |
Urgent help on Sand casting problem | arunprasad | FLUENT | 0 | April 18, 2004 05:04 |