CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Gambit Boundary layers

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2004, 04:35
Default Gambit Boundary layers
Posts: n/a
Hello! i have set up my problem geometry with gambit 2- Due to the complexity of the geometry I have to use sizing functions. When I attach boundary layers with the aspect ratioo option they do look good on the outside but when i mesh the volume the aspect ratio on the inside of the walls is not right. instead of 20% gambit creates cells with 1%- does anyone know what i can do? thnks a lot bert
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set boundary layer of a moving body in GAMBIT to a mesh zone for dynamic mesh tomyangbath FLUENT 18 October 12, 2016 06:57
[Gmsh] gmsh and boundary layers kanuk OpenFOAM Meshing & Mesh Conversion 11 August 14, 2015 12:35
inlet velocity boundary condition murali CFX 5 August 3, 2012 08:56
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 04:15
Gambit 2 Boundary Layers An Modh Coinniolach FLUENT 2 January 30, 2002 11:54

All times are GMT -4. The time now is 21:40.