Report for transient simulation

olegCFD · June 6, 2021, 08:59

Hi all,

I performed calculations with autosave every 100 time steps using Fluent.
In my simulation, I have added some report definitions and report plots for these definition.
After end of calculations, I saved simulation and close Fluent. After that I lost my report plots.

How can I get report plots for at least saved time steps?

Thank you for help.

jojoFD · June 14, 2021, 04:19

Hi,

I usually save it first somewhere else (you never know), and run one more timestep or iteration without initializing. The plots are appearing then

June 6, 2021, 08:59	Report for transient simulation	#1
olegCFD New Member Join Date: Aug 2019 Posts: 4 Rep Power: 6	Hi all, I performed calculations with autosave every 100 time steps using Fluent. In my simulation, I have added some report definitions and report plots for these definition. After end of calculations, I saved simulation and close Fluent. After that I lost my report plots. How can I get report plots for at least saved time steps? Thank you for help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Convergence Problem - Transient Simulation	gemxx	Main CFD Forum	0	July 15, 2018 09:36
Mapping Field Data for Mesh Regions from Another Simulation	veterator	OpenFOAM Pre-Processing	1	July 10, 2018 05:28
Surface Source - Fixed Temperature?	robtheslob	FloEFD, FloWorks & FloTHERM	18	May 12, 2017 02:28
Simulation FPEs - turbulence for transient and steady-state?	DaveR	OpenFOAM Running, Solving & CFD	5	March 5, 2017 15:06
Simulation of high pressure diesel injector - all phases compressible with cavitation	fivos	CFX	4	July 30, 2015 06:48

June 14, 2021, 04:19		#2
jojoFD New Member Join Date: Mar 2021 Posts: 18 Rep Power: 5	Hi, I usually save it first somewhere else (you never know), and run one more timestep or iteration without initializing. The plots are appearing then