|
[Sponsors] |
July 15, 2005, 06:48 |
non-conformal mesh
|
#1 |
Guest
Posts: n/a
|
I am working in a natural convection problem. I have a very complicate geometry, that I have meshed using non-conformal mesh. But displaying contours I have got some discontinuitys in temperature contours, in the boundaries of different volumes. How can I resolve this problems? I have tried to smoothing the transition between the different volumes.
Thank youŞ |
|
July 15, 2005, 06:55 |
Re: boundary conditions in natural ventilation
|
#2 |
Guest
Posts: n/a
|
I am working with fluent in natural ventilation problem, with Boussinesq aproximation. I have a heat source, and I want to get solution without definning inlet and outlet boundary conditions. I think taht the heat source must to force the air flow within the domain. Is it possible to simulate with fluent? How? I do not want to define velocity or pressure at the inlet, because I think this seting will have a decisive influence in the flow field.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 03:52 |
engrid -> save as .stl with boundarie codes | Zymon | enGrid | 31 | August 29, 2011 13:40 |
Conformal Mesh in Multi Phase Flows | ziyasaydam | STAR-CCM+ | 2 | March 16, 2010 15:29 |
conformal vs. non conformal mesh | otho | Main CFD Forum | 2 | May 30, 2008 11:11 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |