|
[Sponsors] |
June 26, 2019, 12:06 |
HTC on two sides wall
|
#1 |
New Member
Igor Vidic
Join Date: Apr 2019
Posts: 12
Rep Power: 7 |
Hello everyone,
Can somebody please explain me how Fluent solve heat trsnsfer problem on coupled wall. For example I am modeling fluid flow around cylinder with energy source in it. I don understand how fluent calculate heat transfer coefficient between fluid and solid. I read that coupling wall means that heat flux is the same on boundary and its shadow zone. Last edited by igor_vidic; June 26, 2019 at 15:48. |
|
June 26, 2019, 17:54 |
|
#2 |
Senior Member
Lucky
Join Date: Apr 2011
Location: Orlando, FL USA
Posts: 5,676
Rep Power: 66 |
The heat flux on both sides of the interface is the same on the coupled wall (via energy balance). On the fluid side, the energy transport equation is solved for temperature/energy. On the solid side, the heat equation is solved for temperature/energy. Eventually you can get a heat flux.
It's similar to solving the flow around a cylinder with a heat flux boundary condition, except that the heat flux is now a free variable and not a fixed value. Heat transfer coefficient is a post-processed quantity that is calculated after-the-fact using the heat flux. |
|
June 27, 2019, 03:51 |
|
#3 |
New Member
Igor Vidic
Join Date: Apr 2019
Posts: 12
Rep Power: 7 |
Thank you very much for your replay. Does it mean that solver calculate temperature values in every cell from these two equation (transport energy equation for fluid and heat equation for solid)?
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How To Calculate Average Heat Transfer Coefficient in CFD-Post? | Shomaz ul Haq | CFX | 16 | November 24, 2019 18:57 |
Centrifugal fan | j0hnny | CFX | 13 | October 1, 2019 13:55 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
PostProcessing Util for Wall HTC and Temperature | trojax | OpenFOAM Programming & Development | 0 | April 2, 2012 11:15 |
HTC and adiabatic wall | Alba | CFX | 4 | November 26, 2007 12:52 |