CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Reynolds Stress Model in Fluent Vs CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 6, 2005, 22:03
Default Reynolds Stress Model in Fluent Vs CFX
  #1
Tim
Guest
 
Posts: n/a
Hi.. I currently have access to both CFX & Fluent 6. I've done some simulation in CFX5.7.1 before and wish to compare the same model in Fluent. CFX5.7.1 has a range of Reynodls Stress Model:

1.SSG model developed by Speziale,Sarkar & Gatski, 2.LRR-IP (isotropisation for production) & -QI (Quasi-Isotropic) developed by Launder,Reece & Rodi 3.Baseline omega model 4.omega-Reynolds Stress model

From what I read from Fluent manual, Reynolds stress model used in Fluent 6 is developed by Gibson & Launder, Launder, and Launder et al. Does anyone know if the model is the same as LRR-IP or LRR-QI used in CFX?

Thanks for your information. Cheers,Tim
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem importing watertight model into CFX djk1301 ANSYS 3 February 1, 2011 22:04
solving ocean wave with Fluent or CFX? gholamghar Main CFD Forum 1 March 21, 2009 12:49
reynolds stress in k-e model ayapan FLUENT 3 December 23, 2005 13:49
How to get Reynolds Stress from Fluent avant FLUENT 0 October 7, 2005 10:37
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 03:27


All times are GMT -4. The time now is 08:45.