|
[Sponsors] |
February 27, 2006, 13:36 |
problem with strong pressure
|
#1 |
Guest
Posts: n/a
|
hello i have a problem , i want to simulate a flow in a small cylindre r=0.8mm l=226mm, the problem is about the pressure, in fact i have a pressure of 150e5 Pa and a temperature of 800k
all boundary condition i chose is bad the system don't converge. if you have a solution it's very sympathic sorry for english I am frensh ma and it's difficult thank |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure calculation problem | maolongliu | OpenFOAM | 1 | August 15, 2010 08:05 |
Pressure profile UDF for unsteady-state problem? | Mohsen Keshavarzian | FLUENT | 2 | August 20, 2008 04:22 |
pressure gradient term in low speed flow | Atit Koonsrisuk | Main CFD Forum | 2 | January 10, 2002 10:52 |
A problem on the pressure | John | Main CFD Forum | 6 | November 18, 2000 06:41 |
Hydrostatic pressure in 2-phase flow modeling (long) | DS & HB | Main CFD Forum | 0 | January 8, 2000 15:00 |