|
[Sponsors] |
March 23, 2006, 05:03 |
Moving bed reactor
|
#1 |
Guest
Posts: n/a
|
Hi all,
I want to simulate a moving sphere bed in a cylindrical tube. Hot air inlets from the tube side near the bottom and leaves near the top. Cold spheres enters from the top and leave the bottom of the tube. The Spheres flow rate at inlet equals that at the outlet and the tube is always full. The speed of the spheres is slow in comparison to the air. I want to determine the temperature distribution at steady state. Any hint is welcome. Thanks a lot in advance. Ahmad |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using) | balu@gold6 | FLUENT | 4 | July 26, 2012 10:37 |
how to model heat transfer inside a slow moving bed? | bigfans | FLUENT | 1 | October 9, 2009 00:12 |
Fixed bed reactor.....you can help...I am sure!! | Amrrefay | FLUENT | 0 | June 6, 2009 06:58 |
Moving Bed Reactor | Ahmad Al-Zoubi | Main CFD Forum | 1 | March 21, 2006 15:45 |
Bubbling Fluidized Bed reactor burning biomass | Mattias | FLUENT | 6 | June 8, 2004 02:53 |