|
[Sponsors] |
October 30, 2006, 15:47 |
compressible couette flow
|
#1 |
Guest
Posts: n/a
|
Hi~all,
I tried to simulate a 2D periodic compressible couette flow. The geometry:Width is 10 and the height is 1. I set up the solver for segregated, steady, laminar, and enable the energy equation. The material is the ideal gas. The top wall is moving at the speed of 10m/s(x-dir). The initial condition i setup is x-velocity is 5m/s. The result is very bad even i have run for 50000 timestep. I expected that i can get a linear curve, however, i just got a s-curve. The convergence of the continuity never reaches the convergence criteria. Do i miss anything?? can anyone answer my question? I thought it should not be hard at all. thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
compressible flow calculation error using rhoSimpleFoam solver | student4326 | OpenFOAM Running, Solving & CFD | 7 | November 2, 2015 11:34 |
About compressible flow at low mach | hit | Main CFD Forum | 2 | October 26, 2009 21:21 |
Compressible Fluid Flow in COMSOL Multiphysics | BBG | COMSOL | 1 | November 19, 2008 14:05 |
Solving unsteady compressible low speed flow | atit | Main CFD Forum | 8 | July 31, 2000 13:19 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |