CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with Dynamic Mesh and Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 12, 2006, 06:14
Default Problem with Dynamic Mesh and Fluent
Posts: n/a
Hello Everybody,

I am a new in this forum.

Now I am trying to model gas gun (system enable to accelerate projectile) with Fluent. I am using Dynamic mesh and I am having a big problem to build my numerical model.

I hope that somebody can help me.

My geometry is a cylinder where I have two regions (one with a higher pressure 18 bar and the other with lower 1 bar) separated by one piston and this piston is moving by UDF.

Now I need what boundary conditions that I must to put and what model (or models) I must use?

Thank for your help.

Kind regards.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic mesh update problem. David FLUENT 3 March 15, 2012 05:02
Dynamic mesh in Fluent to study tire in contact with road surface lihuang FLUENT 10 March 8, 2011 10:21
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55
Problem with Dynamic Mesh and Fluent Claude Main CFD Forum 0 December 12, 2006 06:03
Moving Dynamic Mesh in Fluent 6.2 R.M.Bharath Somayaji FLUENT 0 January 9, 2006 20:36

All times are GMT -4. The time now is 15:59.