|
[Sponsors] |
Obtaining Nu result from internal fin channel |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 1, 2007, 09:06 |
Obtaining Nu result from internal fin channel
|
#1 |
Guest
Posts: n/a
|
I got a problem obtaining Nusselt number data from an internal fin channel...i have used line and rake surface (outer surface) to obtained the data from a 3D rectangular channel...however the results that i have obtained does not coincide with the theory or a specific trend...i am not sure whether the approach that i am using is right...i hope some of u could share some light to this problem...cheers
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Open Channel Flow | ElanMorin | FLUENT | 4 | February 25, 2015 16:26 |
decomposePar change the result? | MrFuglsang | OpenFOAM Running, Solving & CFD | 1 | May 30, 2011 05:58 |
The problem of inner iteration when calling the subroutine | guoxj | CFX | 18 | October 23, 2010 20:37 |
how to define bc for circular tube having internal tappered fin | cadcamvijay | FLUENT | 0 | March 19, 2009 02:03 |
Why wallGradU result is different from dudy in the smooth channel bed | xiuying | OpenFOAM Running, Solving & CFD | 12 | March 2, 2009 07:58 |