CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

evaporation multiphase model ( vof? mixture ? )

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   March 2, 2007, 11:44
Default evaporation multiphase model ( vof? mixture ? )
Posts: n/a
hello I have a plain surface with water on the top and a flow of hot air is passing over the water. Some amount of water is evaporated and converted in water vapor in air phase. Which multiphase model should be used ? I would not like use VOF, because i have tried it and i had many convergence problem with solution. Can i use mixture model? Or eulerian multiphase model ? Thanks for help
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 05:36
question about Heat transfer between two phases with VOF model sooroo3 FLUENT 0 February 15, 2011 03:24
air and water vapour mixture - multiphase model Saba FLUENT 0 February 10, 2009 12:05
Multiphase flow. Dispersed and free surface model Luis CFX 8 May 29, 2007 18:13
Reg VOF multiphase model Akash FLUENT 2 March 17, 2005 10:30

All times are GMT -4. The time now is 14:50.