CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2007, 13:57
Default mesh in gambit
  #1
madhuri
Guest
 
Posts: n/a
hi iam madhu ,i have a question while doin the mesh.my geometry has three volumes where in the middle pipe has smaller tubes(230) inside a hollow pipe and that is to be rotated.simentaneously the side pipes are fixed and the flow should translate from inlet to outlet.finally my geometry is in the order inlet cylinder,rotating bundle cylinder and outlet cylinder .i dont know how to connect the interfaces of rotating and non rotating and how does the meshing in non-rotating pipe be compatible with the rotating tube bundles.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
Successive Mesh in Gambit ashish FLUENT 0 April 28, 2006 01:42
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
[Commercial meshers] Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Meshing & Mesh Conversion 5 April 21, 2005 14:42


All times are GMT -4. The time now is 23:30.