|
[Sponsors] |
November 26, 2007, 05:19 |
2d-axisymmetric- swirl flow
|
#1 |
Guest
Posts: n/a
|
Hi I use 2D axisymmetric swirl model for 2d-simmulation of annular couette flow. I define the fluid source in a moving reference frame with certain angular velocity. Will running it gives the followwing error. Error: divergence detected in AMG solver: x-momentum Thank you in advance. Please help
|
|
December 3, 2007, 02:38 |
Re: 2d-axisymmetric- swirl flow
|
#2 |
Guest
Posts: n/a
|
Hi,
Divergence occurs due to many reasons. Please check whether ur boundary conditions are correct, grid related issues like the aspect ratio of the grids etc,and look at the k and epsilon values of ur turbulence models. also check for ur time step and dx values of ur grid these are the few places where an error or wrong estimation could lead to divergence. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swirl flow recirculation | mfmohdyasin | OpenFOAM Running, Solving & CFD | 4 | June 12, 2015 11:20 |
Boundary condition in an axisymmetric 2D flow | jinwon park | Main CFD Forum | 4 | July 23, 2012 14:55 |
Flow meter Design | CD adapco Group Marketing | Siemens | 3 | June 21, 2011 09:33 |
Convergence for axisymmetric flow | bl201 | Main CFD Forum | 5 | August 16, 2005 18:01 |
URGENT ! Need help on Axisymmetric Flow ! | Suman Kumar | Main CFD Forum | 1 | November 20, 2001 15:51 |