CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Is the boundary layer suitable for dynamic mesh?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 26, 2007, 02:41
Default Is the boundary layer suitable for dynamic mesh?
  #1
Lien
Guest
 
Posts: n/a
I'm trying to analyze an case of oscilating foil with dynamic mesh. The Reynolds Number is relatively low, thus I have to apply boundary layer for more accuracy, theoretically. When the wall zone--my oscillating foil--moves, there're always occurrence of informations such as: negative mesh volume or too large mesh skewness. Is the boundary layer suitable for dynamic mesh? Or what's the best solution of mesh construction for a case like this? Thanks a lot!

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
[snappyHexMesh] Boundary layer in a pipe Clementhuon OpenFOAM Meshing & Mesh Conversion 6 March 12, 2012 13:41
Not able to mesh a helix with boundary layer using gambit rohitjvbibin Main CFD Forum 0 March 5, 2011 12:28
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
errors Fahad Main CFD Forum 0 March 23, 2004 14:20


All times are GMT -4. The time now is 23:32.