CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Plotting Cp vs z-cordinate on Delta Wing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 31, 2007, 09:31
Default Plotting Cp vs z-cordinate on Delta Wing
Posts: n/a
Hi all, iam using geometry of cropped Delta wing which is symmetric about symmetry plane in FLUENT 6.3. Now I want to plot Cp (Coefficient of pressure) values along z-direction. Z-coordinate along x-axis and Cp along y-axis. By doing this and making a line along wall in z-direction its not givng the correct values. tell me how i solve this problem. How to plot? I also need results on bottom side of the wing. means -ve y or windside. Flow is in x-direction. Wing thckness is laong y direction. I need to plot all the values from leeside to windside by creating a single surface

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Meshing a Flat Delta Wing azurespirit ANSYS Meshing & Geometry 1 August 28, 2014 08:11
Cd of Delta wing chitharenjan FLUENT 4 July 22, 2010 10:12
Delta wing problem extraliu Siemens 0 April 27, 2010 14:40
Delta Wing Structured Grid Riaan FLUENT 3 December 31, 2004 12:03
How to mesh a delta wing in the middle of a sphere David FLUENT 0 September 2, 2004 13:19

All times are GMT -4. The time now is 00:44.