|
[Sponsors] |
heat transfer with s2s radiation model in fluent |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 23, 2008, 11:50 |
heat transfer with s2s radiation model in fluent
|
#1 |
Guest
Posts: n/a
|
Hi,
Recently I am running a model to study the heat transfer effect. The model is a hot object in a room. The B.C. for the hot object is fixed temperature, the B.C. for the room surfaces is 0 heat-flux. The s2s radiation model is on. After I got the result, I found the convection heat transfer is extremely high. The wall.-func.-heat-trans.-coeff. is couple of hundreds at many surfaces. If I turn off the rad model, the wall.-func.-heat-trans.-coeff. is back to normal (10~100). Could anybody tell me what's the reason that the wall.-func.-heat-trans.-coeff becomes so high after the radiation model is on? Thanks very much. D. L. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
radiation heat transfer | CFD_student | FLUENT | 1 | May 2, 2007 09:46 |
radiation heat transfer | hadi | FLUENT | 1 | September 22, 2004 05:04 |
Radiation heat transfer | mehdi | Main CFD Forum | 0 | July 1, 2003 08:10 |
Radiation Heat Transfer | The IFRF Heat Transfer Team | Main CFD Forum | 0 | January 31, 2000 14:02 |
Heat Transfer with Radiation | I.Dotsikas | Main CFD Forum | 6 | April 16, 1999 12:06 |