CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Solve a mass diffusion problem

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 26, 2008, 01:47
Default Solve a mass diffusion problem
  #1
Roberta
Guest
 
Posts: n/a
Hello, I'm at the beginning to use fluent therefore sorry if i ask maybe stupid question... I have the following problem: there is a capillary one open ended filled with a solution of initial mass fraction =1% with a note diffusion coefficient at fixed temperature. The capillary diffuses in pure water through only the open end of capillary. D is of order 10^-10 m^2/s and i want know the evolution of mean mass fraction in the capillary until a time of 10^6 seconds for PURE DIFFUSION.. How can I solve this problem at better..?I have a theoretic solution of this problem but in my simulation the evolution of concentration is completely different from the theoric curve!

  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set BC for the mass diffusion? Pete FLUENT 7 September 2, 2017 05:28
Using OpenFOAM to solve molecular diffusion alex OpenFOAM Running, Solving & CFD 0 November 21, 2008 15:45
Mass Diffusion Problem : How to? Rahul CFX 3 October 27, 2008 14:15
Can I use OpenFOAM to solve unsteady diffusion problem yongshenglian OpenFOAM Running, Solving & CFD 1 September 17, 2008 12:03
how to solve the mass loss problem of level set? Jane Main CFD Forum 0 March 14, 2007 07:41


All times are GMT -4. The time now is 12:58.