CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Using the discrete ordinates solar load model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   January 23, 2009, 07:17
Default Using the discrete ordinates solar load model
Gary Slavin
Posts: n/a
I've been trying to apply the DO radiation model to my geometry. I have applied conditions via the solar calculator but i am very confused as to the setup you must give surfaces in order for them to partake in solar irradiation. According to the fluent user manual, all irradiative surfaces should be set to semi transparent but this does not appear to work?

If you have any idea on this then please help me!


  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Solar radiation model Min Siemens 2 August 31, 2018 08:04
discrete phase model venu FLUENT 4 December 28, 2011 06:52
Discrete Phase Model Andrew Slezak FLUENT 2 March 1, 2007 13:17
Regarding Solar Radiation model kiran kumar FLUENT 0 December 29, 2006 09:57
discrete phase model antonietta FLUENT 1 February 10, 2006 00:13

All times are GMT -4. The time now is 09:18.