|
[Sponsors] |
April 9, 2009, 09:18 |
Discrete phase modeling on porous media
|
#1 |
New Member
Mirco Magnini
Join Date: Apr 2009
Location: Bologna, Italy
Posts: 14
Rep Power: 17 |
Hi everybody, I need to model particles lifted by air in a channel. The channel ends with a porous surface, which is the basis of a porous volume. This surface is moving and it let particles to escape from channel, while air has to pass through porous media and then flow out. Unfortunatly, even with very high inertial and viscous coefficient for porous media, particles passes through porous media, while they should stop on its surface. Has anybody experiencewith this kind of problem?
Thanks in advance |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Modeling thin perforated plates as porous media | Mike | FLUENT | 0 | August 21, 2007 05:16 |
Discrete phase model in porous media | Pradeep | FLUENT | 0 | February 3, 2006 17:30 |
Two phase flow in porous media | Madhavi Krishnan | FLUENT | 3 | June 6, 2005 06:52 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 16:16 |
Discrete Phase Modeling | Fred Kang | FLUENT | 3 | October 18, 2000 11:23 |